H76 Tractor Engine 5CC Horizontal Twin-cylinder Dual Flywheel Gasoline Engine

Features:

Vintage Engine:

1. This horizontal twin-cylinder gasoline engine boasts an antique exterior design while maintaining steady speeds. It features a water-cycle cooling system with a water pump and is equipped with the latest electronic distributor ignition system, powered by 4.5V (3*AA batteries).
2. Crafted from brass and stainless steel, this meticulously engineered engine model comes fully assembled and mounted on a wooden base, ready to operate at any time. Simply add fuel to run it, and experience the unique charm of mechanical engine operation.

Steps to Start the Engine:

1. Check the engine wiring from the wooden base, connect the fuel tank oil pipe, and install 3 AA batteries (4.5V).
2. Fill the fuel tank with 95# gasoline. Rotate the flywheel clockwise multiple times on the right side of the engine (the surface of the power switch) to ensure the mixed fuel enters the cylinder completely and removes any air from the fuel pipe.
3. Turn on the power switch and quickly turn the flywheel clockwise to start the engine on the right side (surface of the power switch).

Notes:

1. Add water to the water tank once the engine starts working to maintain proper cooling.
2. If the engine fails to start normally despite normal ignition and cylinder compression, adjust the carburetor oil needle.
3. After tightening the main oil needle on the carburetor, loosen it 1/4 circle to achieve the normal working mixing ratio of gasoline and air.
4. When the engine stops running, turn off the power switch.

Superb Model & Gift: This exquisite mechanical craft offers the allure of a working engine, suitable for personal collection or as an impressive high-end gift for model and mechanical enthusiasts on occasions like Christmas or birthdays.

Specifications:
.Material: Brass/Stainless Steel/Bamboo
.Item No: H76
.Overall Dimensions: 200*130*140mm
.Wooden Base Dimensions: 200*120*30mm
.Displacement: 5CC
.Cylinder Diameter: 13mm
.Stroke: 12mm
.Supply Voltage of Ignition: 4.5V (3*AA Batteries, Not Included)
.Starting Mode: Manual/Electronic Drill Starting
.Product Dimensions: 18 x 13 x 11cm
.Product Weight: 2400g
.Package Dimensions: 25 x 25 x 25cm
.Package Weight: 2800g
.Packing: Box
.Ages: 14+

Packing List:
1 x H76 Internal Combustion Engine Model
4 x Spare O-ring
1 x Starting Coupling Shaft
1 x Instructions